electronic production line manufacturers

Discussion in 'Introduce yourself' started by zhebaby0721, Nov 9, 2018.

  1. zhebaby0721

    zhebaby0721 Member
    Member

    Joined:
    Nov 9, 2018
    Messages:
    10
    Likes Received:
    0
    TV Assembly Line
    Tv assembly line which is used for assembling led tv,crt tv,consisting of assembly line
    and aging line,can be for automatic and manual based on the production capacity.
    Speed Plus Chain Conveyor Line Used for Assembling TV Specification Is As Follows.
    1.Supporting Leg:50*50*T1.5mm aluminum extrusion,equipping column support on each 2 meters;
    2.Guide rail:118*100*T2.0mm aluminum extrusion;
    3.Conveying Part: speed chain with flexible roll.
    4.Instruction Board:support adopts 15*26 double parallel aluminum bars,in H shape.green acrylic plate.equipping with transparent A3 acrylic plate each meters
    5.Tool Hanging Rail:support made of 28*30 aluminum,equipping with a set of wheel each meter;
    6.Lighting:28w,T5 Led Tube with cover daylight,continuous rank,section control;
    7.Plating Bench :T15mm wooden board pasting fire proof,T shape cover.
    8.Wire Slot: Equipping in the aging line and testing section.With conductive wheel A-02B,pitch 200mm.
    9.40*80 galvanized wire slot:Equipping with socket on each m;
    10.Air Pipe:3/4” galvanized pipe, equipping air cock on each m,
    11.Feet:M16*80mm galvanized feet,adjustable height±30mm;
    Line Surface: carbon steel powder coating.
    TV Line Conveyor Specifications
    Supporting LegGuide RailMotor Aging LinePLCDevices
    50*50*T2.0mm aluminum extrusion,60*60*2.0mm carbon steel tube118*100* T2.0mm aluminum extrusionGear Motor,Sew,CPG, GPG BrandFree OptionMitsubishi,Omron, Chint ,Delta Speed ControllerJack Up Transfer, Elevator, Isolation Transformer
    Customized Specifications Needed As Follows
    1)What sizes of tv will be assembled?
    This will decide the pallet size(pallet sizes very important which will influence the conveyor project design)
    2) The Production Capacity?
    This will decide the assembly line conveyor running speed.
    3)Need Aging or Not? If need,how many aging hours needed?
    Some manufacturers need aging process ,however some not need,and some use aging rack instead of aging line for reducing the cost and lower the capacity.
    4)Need the Workshop Layout.
    Designing a suitable project need workshop layout in cad form.
    Tv Line Successful Cases
    HLX Tv Line successful cases including Skyworth,HKC Holland,Hugo,Walton,Rfl etc.electronic production line manufacturers
    website:http://www.hlxconveyor-system.com/assembly-line/electronic-assembly-line/
     

Share This Page